Decorative acrylic plaster


  • resistant to weathering
  • resistant to mechanical damage
  • crack resistant
  • vapor permeable
  • hydrophobic

Packing: 25 kg

  • Application
  • Specifications
  • Features
  • Reviews

For the protection and decoration of surfaces with high operational load outside and inside the premises, as well as the use as a finishing layer in the thermal insulation system using polystyrene foam boards.

Due to its hydrophobic properties, it is particularly resistant to atmospheric precipitation and is recommended for decorative finishing of facades of buildings and structures, except for horizontal surfaces that are constantly exposed to water.

Designed for application on cement-sand, cement-lime, lime, gypsum, concrete, brick surfaces or HA, chipboard, OSB, etc. It is used indoors, requiring high wear resistance of walls: flights of stairs, corridors, halls, lobbies, public places, etc.

Leave your review

There are no reviews yet.

CompositionA mixture of modified aqueous dispersions of polymers, fillers, functional and hydrophobic additives.
ToningToned with water and universal pigment pastes.
Density~ 1.7 kg/l
Mass fraction of non-volatile substances85 %
Dry film thicknessЕ5 ˃400 µm
Vapor permeabilityV2 Medium (≤150 >15)
Water permeabilityW2 Medium (≤ 0.5 > 0.1 kg/(m2 x hour 0.5)
Substrate temperature during applicationfrom + 5 to +30 °С
Coverage rate2.0-4.0 kg/m2, depending on the fraction
Drying time at air temperature +20 °C and humidity 55%8 ocloc’k

Where to buy

For technical advice and the purchase of our products, please contact us by phone or fill out the application form


Submit your application

Select site language: