PCN-027

Hard putty cement sandless front (Superfinish)

Properties:

  • thin-layer finishing alignment (0.6-2 mm)
  • minor repairs and puttying (up to 3 mm) of surfaces of facades and interiors
  • creating smooth, sturdy white surfaces for decoration and painting
  • moisture resistant
  • frost resistant
  • vapor permeable
  • weatherproof
  • highly flexible, easy to iron
  • high adhesion to mineral surfaces

Packing: 20 kg

Application
  • Application
  • Specifications
  • Documents
  • Reviews
  • Features

Putty (superfinish white) PCN-027 ready dry mix for a finish thin-layer alignment of the bases which are not deformed (a brick, light concrete, concrete, cement, cement-limy and similar plaster, etc.), both outside and inside dry and wet rooms.

Putty PCN-027 can be used as a decorative layer, as well as for puttying small recesses and defects.

After grouting the treated surface, a smooth, solid surface of white color is formed for painting or further finishing.

! Available in two colors: bright white, gray

 

 

Technical passport

CONCLUSION OF STATE SANITARY AND EPIDEMIOLOGICAL EXAMINATION ON DRY MIXTURES PC POLIPLAST LLC

CONCLUSION OF THE LABORATORY OF RADIOLOGICAL HYGIENE TM POLYPLAST | GLUE MIXTURES

Leave your review

There are no reviews yet.

Compositiona mixture of cement with mineral aggregates and polymer modifiers
Colorwhite or gray (indicated on the packaging)
Layer thickness– with full alignment – 0.6 – 2 mm

– with partial – up to 3 mm

Aggregate sizeno more than 0.2 mm
Air and base temperature during applicationfrom +10 to +25 °С
Mixing ratio~ 0.30 ± 0.01 L water per 1 kg of dry mix
Mortar mobility 7±2 сm
 Mortar shelf lifenot less than 90 minutes
28-day compressive strengthnot less than 10 MPa
28-day bending tensile strengthnot less than 1.0 MPa
Adhesionnot less than 0.5 MPa
Frost resistancenot less than 75 cycles
Crack resistanceno cracks in the layer 3 mm thick
Hardened Density1.3-1.7 kg / dm3
Hardened mortar operating temperaturefrom -30°С to +60°С
Vapor permeabilitynot less than 0.05 mg / m × h × Pa
Shrinkageno more than 1,5 mm / m
Dry mix consumption~ 1.2-1.5 kg / m² × 1 mm of layer thickness

Where to buy

For technical advice and the purchase of our products, please contact us by phone or fill out the application form

or

Submit your application
Calculator Where To Buy