fbpx

PСSh-018 M/ML

Universal plaster for porous substrates (with perlite)

Properties:

  • for machine and manual application
  • adapted to all types of plastering stations
  • PCSH-018 M - cement-limestone with the addition of perlite
  • PCSh-018 ML - lightweight cement-limestone, with increased perlite content
  • especially recommended for porous foundations (gas and foam concrete blocks, ceramic blocks and bricks)
  • high vapor permeability
  • layer thickness: 8-25 mm per application
  • for internal and external works
  • plastic and easy to use
  • base color: white, gray

Packing: 25 kg

Application
  • Application
  • Specifications
  • Features
  • Reviews

Plasters PCSH-018 M / PCSH-018 ML are universal modified cement-lime plaster mixtures with the addition of perlite, recommended for machine and manual application and adapted to all types of plastering stations. Intended for plastering walls and ceilings from foam and aerated concrete blocks, brick and concrete surfaces for further decoration with decorative plasters, paints or tiling. They are especially effective when plastering surfaces made of aerated concrete. They are used inside and outside buildings. The hardened solution has high vapor permeability.

PCSH-018 ML is a professional formula with increased perlite content. Improves the thermal insulation properties of the enclosing structure. It has high technical and operational characteristics. Recommended for facades.

 

 

 

 

Leave your review

There are no reviews yet.

  

PСSh-018 M

 

PСSh-018 ML

Compositioncement-lime mixture with mineral fillers and modifying additives, contains perlite
Appearancehomogenous free-flowing mixture without foreign impurities
Coloroff-white or off-white
mixing ratio0.19 l ± 0.01 l of water per 1 kg of dry mixture; 4.5 – 5.0 liters of water per 25 kg of dry mix0.21 l ± 0.01 l of water per 1 kg of dry mixture; 5.0 – 5.5 liters of water per 25 kg of dry mix
Aggregate sizeno more than 0.63 mm
Shelf life from start of mixingat least 60 minutes
Air and substrate temperature during applicationfrom +5°С to +30°С
Layer thickness8-25 mm per application layer8-20 mm per application layer
Mobilityat least 8 cm
Adhesion to the substratenot less than 0.2 MPa
Compressive strength after 28 daysnot less than 2.5 MPanot less than 4.0 MPa
Flexibility after 28 daysnot less than 1.2 MPanot less than 1.5 MPa
Vapor permeability of the solutionnot less than 0.1 mg/m*hour*Pa
Thermal conductivityno more than 0.3 W/(m*K)
Frost resistanceat least 50 cycles
Operating temperature of the hardened solutionfrom -30°С to +70°С
Dry mix consumption1.15-1.2 kg/m2 /mm layer thickness1.1 kg/m2 /mm layer thickness

Where to buy

For technical advice and the purchase of our products, please contact us by phone or fill out the application form

or

Submit your application

Select site language: