• high vapor permeability
  • crack resistant
  • plastic
  • strong
  • high adhesion to the base
  • for manual and machine application

Packing: 25 kg

  • Application
  • Specifications
  • Features
  • Reviews

Plaster PCSH-017 – a modified, strong cement-lime plaster mixture for manual and
machine application.

It is used for thick-layer leveling, plastering of walls, etc
ceilings based on foundations (gas and foam concrete blocks, ceramic blocks, brick, concrete, cement-lime or
cement-sand surfaces, etc.), before puttying or placing finishing touches
materials (wallpaper, painting, etc.). It is used inside dry rooms.





Leave your review

There are no reviews yet.

Structurecement mixture with mineral fillers and polymeric modifiers
Appearancehomogeneous granular mixture gray without impurities
aggregate sizenot more than 1.25 mm
mixing ratio0.16 ± 0.01 L of water per 1 kg of the dry mixture
Thickness5-20 mm
Temperature of the substrate and bases+5 to +30 ° C
Shelf life after mixingat least 60 minutes
Mobilityat least 8 mm
Compression strength (after 28 days)at least 5 MPa
Tensile strength (after 28 days)not less than 1.2 MPa
water vapor permeabilitynot less than 0.10 mg / m * h * Pa
crack resistanceabsence of cracks in the layer thickness of which is equal to the maximum recommended thickness deposition per pass
Operating temperature of the solidified solution-30 to +70 ° C.
Consumption of dry mixture~ 1,25-1,3 kg / m² at 1 mm layer thickness

Where to buy

For technical advice and the purchase of our products, please contact us by phone or fill out the application form


Submit your application

Select site language: