
tech description
PСSh-008
Plasterings decorative mineral groups PСSh
Radiation Test Report | PСSh-008
Properties:
- Fiber reinforced
- Suitable for high-rise construction
- For manual application
- For indoor and outdoor use, dry and wet. premises
- Moisture-resistant, frost-resistant, vapor-permeable
- Good adhesion to the substrate
- Plastic, easy to use
- Layer thickness 10-20 mm (optimal 15 mm)
- Economic
Packing: 25 kg
Application
- Application
- Specifications
- Features
- Reviews
Cement plaster PСSh-008 is a ready-to-use dry plaster mixture used for thick-layer roughing and plastering of walls and ceilings, facades of buildings and other load-bearing hygroscopic substrates that are resistant to deformation (brick, lightweight concrete, concrete, etc.).
And also for repairing old plasters inside dry and wet rooms and outside buildings before applying cement putties, decorative plasters, cladding.
There are no reviews yet.
Composition | a mixture of cement with mineral aggregates and polymer modifiers |
Appearance | a homogeneous mixture of gray color without any impurities |
Fraction | up to 0.63 mm |
Mixing proportions | 0.16 ± 0.01 l of water per 1 kg of dry mixture |
The thickness of the layer | 10-20 mm (optimum 15 mm) |
Air temperature and base when applied | from +5 to +30 °С |
Shelf life from the time of mixing | not less than 60 minutes |
Moisture content | not more than 1,0% |
Mobility | 6,0±0,5 mm |
Water holding ability | not less than 95% |
Adhesion to the base | not less than 0.3 MPa |
Compressive strength (after 28 days) | not less than 7.5 MPa |
Tensile strength (after 28 days) | not less than 2.0 MPa |
Frost resistance | not less than 50 cycles |
Operating temperature of the solidified solution | from -30 to +60 °С |
Consumption of dry mix | ~ 1.6 kg / m² per 1 mm layer thickness |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your applicationSelect site language:
