tech description
PSV-045
Mixtures for the installation of floor elements
Radiation Test Report | PSV-045
Properties:
- high strength
- low level of surface abrasion
- high resistance to mechanical stress
- a possibility of application both for internal, and for external works
Packing: 25 kg
Application
- Application
- Specifications
- Reviews
- Features
PSV-045 is a dry building mix based on highly active cement, fractionated quartz aggregates and modifier additives.
The PSV-045 mixture is used to strengthen the top layer of concrete floors exposed to significant mechanical stresses during operation (floors in warehouses, garages, trading floors, service stations, industrial premises of enterprises, road surfaces, etc.).
There are no reviews yet.
| Сomposition | high-activity portland cement, fractionated quartz aggregates and modifier additives |
| Appearance | homogeneous mass of granular gray without impurities |
| The maximum size of the placeholder | not more than 4.0 mm |
| Moisture content | not more than 0,5% |
| Temperature range of use | from +10 ° C to +30 ° C |
| Readiness of the floor for technological loads | after 7 days |
| Readiness of the floor for operation | after 28 days |
| Operating temperature of the floor | from -50 °С tо +70 °С |
| Consumption of dry mixture | 4-5 kg / m² |
| The compressive strength at the age of 3 days | not less than 20 MPa |
| The ultimate compressive strength at the age of 28 days | not less than 60 MPa |
| The tensile strength of bending at the age of 28 days | not less than 7.0 MPa |
| Strength of adhesion to a concrete base after keeping in air-dry conditions | not less than 1.5 MPa |
| Erasure | not more than 0.7 g / cm2 |
| Shrinking | not more than 1.5 mm / m |
| Frost resistance | at least 75 cycles |
You may be interested in…
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your applicationSelect site language:
