Properties:
- Reinforcement by fiber
- High adhesion
- Nonflammable
- Water-resistant, cold-resistant, vapor-permeable
- Plastic, easy to putty
- Shockproof
- The high fixing ability at fastening
- Suitable for high-rise construction
Packing: 25 kg
- Application
- Specifications
- Documents
- Reviews
- Features
Adhesive mixer reinforcing for systems of insulating universal PST-014 – is used in systems for insulating facades of buildings and structures for fixing polystyrene foam (including extruded polystyrene foam), mineral wool and foam glass plates, as well as for arranging a protective reinforcing layer (putty) on insulation plates for thermal insulation of building facades. Effective for bonding decorative elements of polystyrene foam inside and outside buildings.
The mixture is effective for non-deformable bases.
Technical passport
CONCLUSION OF STATE SANITARY AND EPIDEMIOLOGICAL EXAMINATION ON DRY MIXTURES PC POLIPLAST LLC
CONCLUSION OF THE LABORATORY OF RADIOLOGICAL HYGIENE TM POLYPLAST | GLUE MIXTURES
There are no reviews yet.
| Composition | a mixture of cement with mineral aggregates and polymer modifiers |
| Appearance | homogeneous granular mixture of gray color without impurities |
| Fraction | no more than 0.50 mm |
| Mixing ratio | 4.5-4.75 l water per 25 kg (0.18 ± 0.1 l water per 1 kg) dry mix |
| Air temperature and bases during the application | from +5 to +30°С |
| Expiration date from the moment of mixing | not less than 120 minutes |
| Adjustment time | at least 10 minutes |
| Adhesion to the base | not less than 0.8 MPa |
| Adhesion to insulation plates | cohesive rupture over insulation – after 7 days of hardening – with expanded polystyrene – not less than 0.08 MPa, – with mineral wool – 0.015 MPa |
| Vapor permeability | not less than 0.11 mg/(m*h*Pa) 0.11mineral wool; 0,045 of expanded polystyrene |
| Further finishing work | not earlier than the second day |
| Frost-resistance | not less than 75 cycles |
| Operating temperature of the hardened solution | from -50 to +70°С |
| Dry mix consumption | for fixing tiles: from 2.0 kg/m²; for gluing insulation: from 5.0 kg/m²; for the device of a protective reinforcing layer: from 3.0 kg/m² |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your applicationSelect site language:
ПОЛІПЛАСТ ™ ОГОЛОШУЄ КОНКУРС НА ЧЕСТЬ ДНЯ БУДІВЕЛЬНИКА
🎰 РОЗІГРУЮТЬСЯ:
◾ Суперприз🏆 – крутезний лазерний лінійний нівелір (лазерний рівень)
◾ Комплект брендованого професійного одягу👷♂️(комбенізон, футболка, бейсболка)
◾ Корисна сувенірна продукція для будівельника🧰
