Properties:

  • moisture resistant, frost resistant
  • it has high adhesion to the base
  • the thickness of the layer is 20-50mm
  • for alignment of both horizontal and angled surfaces
  • plastic, easy to prepare and use
  • economical

Packing: 25 kg

Application
  • Application
  • Specifications
  • Documents
  • Reviews
  • Features

Floor screed PSP-033 – ready dry mix for performance of screeds, slope floor screed, leveling and repair of strong hydrophilic bases resistant to deformation (cement, concrete, clay concrete and others) with a layer from 20 to 50 mm indoors and outdoors. Gives a flat, solid surface.

If it is necessary to increase the elasticity, hydrophobic properties of the mixture, as well as the adhesion to the base, prepare the solution with the addition of concentrated emulsions: contact PL-125, elastic PL-127.

 

 

 

 

Technical passport

CONCLUSION OF STATE SANITARY AND EPIDEMIOLOGICAL EXAMINATION ON DRY MIXTURES PC POLIPLAST LLC

CONCLUSION OF THE LABORATORY OF RADIOLOGICAL HYGIENE TM POLYPLAST | GLUE MIXTURES

Leave your review

There are no reviews yet.

Structurecement mixture with mineral fillers and polymeric modifiers
Appearancehomogeneous granular mixture gray without impurities
mixing ratio2.75-3.25 ~ l of water per 25 kg (0,12 ± 0,01 liter of water for 1 kg) of dry mixture, depending on the desired consistency
Temperature of the substrate and bases+5 to +30 ° C
Shelf life after mixingat least 90 minutes
Thickness20-50 mm
Mobilityat least 8 cm
Adhesion to the substratenot less than 0.2 MPa
Compression strength (after 28 days)not less than 15.0 MPa
Tensile strength in bending (after 28 days)not less than 3.5 MPa
Shrinkagenot more than 2.0 mm / m
Operating temperature of the solidified solution-30 to +70 ° C.
Consumption of dry mixture~ 1.8-2.1 kg / m² at 1 mm layer thickness

Where to buy

For technical advice and the purchase of our products, please contact us by phone or fill out the application form

or

Submit your application
Calculator Where To Buy