Color mix for filling and jointing of thermal panels
PSM-082 – a dry color mixture for filling and jointing joints of thermal panels and other facing materials (masonry clinker, ceramic, silicate facing bricks, natural and artificial stone, tiles and other wall materials) up to 20 mm wide between facing materials inside and outside the buildings.
A wide selection of colors (18 shades).
There are no reviews yet.
|Composition||a mixture of cement with mineral aggregates and modifying additives|
|Appearance||homogeneous loose mass without impurities|
|Fraction||fine-grained: up to 0.5 mm|
|Moisture content||not more than 0.5%|
|Mixing ratio||3.0-4.0 L of water per 25 kg of mixture (0.12 L – 0.16 L of water per 1 kg of mixture)|
|Mortar density||~ 1.5 kg/dm2|
|Air and base temperature during application||from +5 to 30 ° С|
|Shelf life from the start of the mixing||at least 60 minutes|
|Adhesion to the base||not less than 0.5 MPa|
|Compression strength at the age of 28 days||at least 12 MPa|
|Tensile strength at the age of 28 days||at least 3.5 MPa|
|Frost-resistance||not less than 75 cycles|
|Water-retention capacity||not less than 95%|
|Stitching||not earlier than 60 minutes|
|Operating temperature of the solidified solution||from -30 ° C to + 70 ° C|
|Dry mix consumption||from 2.3 kg per 1 m2 of masonry, depending on the type of masonry, the width and depth of the seam|