Mixture (colored) for stitching clinker masonry, facing brick and stone


  • for filling and jointing
  • resistant to aggressive atmospheric conditions
  • moisture resistant, frost resistant, hydrophobic
  • high adhesion
  • holds firmly on the side surfaces of brick or stone
  • plastic, easy to prepare and use
  • wide range of colors
  • presented in fine or coarse fractions

Packing: 25 kg

  • Application
  • Specifications
  • Features
  • Reviews

PSM-081 – a dry color mixture for filling and stitching masonry joints of brick, ceramic, silicate facing bricks, natural and artificial stone and other wall materials inside and outside the premises.

A wide selection of colors, a fine-grained or coarse-grained texture is possible.







Video instruction for cleaning, hydrophobizing and embedding clinker brick facades:

Leave your review

There are no reviews yet.

Compositionmixture of cement with mineral aggregates and modified additives
Appearancehomogeneous free-flowing mass without impurities
Colouras indicated by the manufacturer
Mixing ratio1.63-2.13 l of water per 25 kg of the mixture (0.065 l – 0.085 l of water per 1 kg of the mixture) for the consistency of a semi-dry or slightly viscous mixture
Aggregate sizefine-grained: 0-0.63 mm, not less than 97%;

coarse: 0-1.25 mm, not less than 97%.

Expiration date from the beginning of mixingAt least 1 hour
Air and substrate temperature during applicationfrom +5 to +30 ° С
Mixing water temperaturefrom +15 ° С to +20 ° С
Embroideryno later than 2 hours
Substrate adhesionnot less than 0.5 MPa
Compressive strength after 3 daysnot less than 3 MPa
Compressive strength after 28 daysnot less than 10 MPa
Flexural strength after 28 daysnot less than 2.5 MPa
Water absorption coefficientno more than 0.5 kg / m² ∙ √h
Shrinkageno more than 1.5 mm / m
Frost resistanceat least 50 cycles

Where to buy

For technical advice and the purchase of our products, please contact us by phone or fill out the application form


Submit your application

Select site language: