tech description
tech description
PSM-075
ПСМ-075 ЗИМА минус 5
Mixes for a laying
Radiation Test Report | PSM-075
Properties:
- for laying walls and partitions made of ceramic and silicate brick
- for laying cinder blocks
- for the repair of plastered surfaces
- for the device and repair of floor screed
- weather resistant
- convenient to prepare and use.
- economical
Packing: 25 kg
Application
- Application
- Specifications
- Features
- Reviews
Смесь ПСМ-075 – готовая сухая смесь для широкого спектра строительных работ: кладки стен и перегородок из керамического, клинкерного и силикатного кирпича; для укладки шлакоблоков; для восстановления и ремонта элементов кладки и оштукатуренных поверхностей; для устройства, выравнивания и ремонта стяжки пола.
Применяется внутри и снаружи зданий на вертикальных и горизонтальных поверхностях.
There are no reviews yet.
| Structure | cement mixture with mineral fillers and polymeric modifiers |
| Appearance | homogeneous granular mixture gray without impurities |
| Fraction | 0-1.25 mm |
| Moisture contents | not more than 0.5% |
| Mixing ratio | 3 – 3.75 L per 25 kg bag (0.135 +/- 0.015 L / kg) |
| Temperature of the substrate and bases | +5 to +30 ° C |
| Shelf life after mixing | at least 60 minutes |
| Mobility | at least 5 cm |
| Adhesion to the substrate | not less than 0.2 MPa |
The compressive strength at the age of 28 days | 10 MPa |
| frost-resistance | not less than 50 cycles |
| Water retention | not less than 95% |
| Operating temperature of the solidified solution | -30 to +70 ° C. |
| Fancy | not later than 2 chasa |
| Consumption of dry mixture | masonry: 25 kg per 1 m² of masonry when the joint width 10 mm; tie: ~ 1.8-2.1 kg / m² at 1 mm layer thickness |
You may be interested in…
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your applicationSelect site language:
