Lightweight masonry thermal insulation mix
- contains perlite
- increases thermal insulation and sound insulation properties of masonry
- reduces heat loss through wall structures
- prevents freezing of stitching joints (cold bridges)
- frost-, moisture resistant, vapor permeable
- it has high adhesion to the base
- plastic, easy to prepare and use
Packing: 30 l
Certified product in accordance with ISO 14024, environmental certificate No. UA.08.002.440more details
Thermal insulation mix PSM-050 “Termoshov” – dry construction modified mix for laying of external and internal walls, partitions from various ceramic and other heat-insulating masonry products: ceramic hollow blocks, cinder blocks, expanded clay blocks, blocks and panels from cellular concrete(foam -, aerated concrete), double bricks, silicate bricks, ordinary bricks and other bricks, etc.
The high thermal insulation properties of this mixture allow to obtain a homogeneous, from the point of view of thermal insulation, masonry without the formation of “cold bridge”.
The masonry made with a mixture of PSM-050 “Termoshov” has increased sound insulation and heat insulation properties compared to conventional masonry mixtures.
There are no reviews yet.
|Composition||a mixture based on hydraulic binder with mineral fillers, perlite and modifying additives|
|Appearance||homogeneous loose weight without impurities|
|Mixing ratio||0,43 ± 0,01 l of water per 1 kg of the mixture|
|The thickness of the masonry seam||~12 mm|
|The basis temperature when applying the mortar||from +5 to +30 °С|
|Shelf life from the moment of mixing||at least 120 minutes|
|Tensile strength (28 days)||not less than 5 MPa|
|Strength grip with the base||not less than 0.2 MPa|
|Frost resistance||not less than 50 cycles|
|The mobility of the mortar||not more than 5 cm|
|Thermal conductivity in the dry state||not more than 0,19 W / (m * K)|
|Operation temperature of solidified solution||from -35 to +70°С|
|Consumption||~ 25-30 liters of mortar / m² depending on the size and shape of the block at a seam thickness of 12 mm|
Select site language: