Thin concrete putty for warm surfaces
- for small repair of concrete and reinforced concrete structures
- withstands temperature increase when applied to the surface without preliminary priming (reinforced concrete panels after the steaming chamber)
- has a low shrinkage
- resistant to cracking
- water and frost resistant
- highly plastic, easy to apply and grouting
- suitable for interior and exterior work
Packing: 25 kg
The thin-layer PRR-228 putty is intended for leveling and filling of potholes, damaged places, small cracks and caverns on concrete and reinforced concrete structures.
Works effectively in a thin layer and on surfaces with highly absorbent properties without first priming at elevated temperatures up to + 45 ° C (for example reinforced concrete panels after
It can be applied on vertical and horizontal surfaces at external and internal
works, including painting and decorative plastering of building facades.
Not suitable for leveling of light and porous concrete, brickwork, lime and gypsum plasters. In one pass the mixture can be applied with a layer thickness of 0.2 mm to 7 mm.
There are no reviews yet.
|Composition||a mixture of high-strength cements with mineral aggregates and polymer modifiers|
|Appearance||homogeneous granular mixture of gray color without impurities|
|Mixing ratio||~ 0.20-0.22 l of water per 1 kg of dry mix|
~ 5.0-5.5 liters of water per 25 kg of dry mix
|Mortar shelf life||not less than 30 minutes|
|Compressive strength (after 3 days)||not less than 6.0 MPa|
|Bending strength (after 28 days)||not less than 30.0 MPa|
|Adhesion to the base||not less than 2.0 MPa|
|Frost resistance||not less than 75 cycles|
|Aggregate size||no more than 0,5 mm|
|Shrinkage||no more than 1,2 mm / m|
|Dry mix consumption||~ 1.4-1.6 kg / m² per 1 mm of layer thickness|
You may be interested in…
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
orSubmit your application