Properties:
- water resistant
- frost resistant
- high adhesion (not less than 2 MPa)
- convenient to work
Packing: 25 kg
Application
- Application
- Specifications
- Documents
- Reviews
- Features
The PRR-217 mixture is used for the repair of reinforced concrete structures, in case of damage caused by prolonged use or destruction under the influence of mechanical loads or corrosion processes.
This mixture is intended for corrosion protection of steel reinforcement and the creation of an adhesive layer when working with repair mixtures PRR-222, PRR-223 and PRR-224 TM Poliplast.
Technical passport
CONCLUSION OF STATE SANITARY AND EPIDEMIOLOGICAL EXAMINATION ON DRY MIXTURES PC POLIPLAST LLC
CONCLUSION OF THE LABORATORY OF RADIOLOGICAL HYGIENE TM POLYPLAST | GLUE MIXTURES
There are no reviews yet.
| Composition | a mixture of binders with mineral fillers, polymer modifiers and a corrosion inhibitor |
| Appearance | homogeneous granular mixture of gray color without impurities |
| Mixing ratio | 6.5-6.75 L per 25 kg dry mix |
| Mortar shelf life | not less than 60 minutes |
| Mortar application temperature | from +5 to +30 ° С |
| Operating temperature | from -30 to +70 ° С |
| Adhesion to the base after aging in air-dry conditions at the age of 28 days | not less than 2.0 MPa |
| The consumption of dry mix when creating an anti-corrosion layer | ~ 2.0 kg / m² (2 layers, total thickness 1 mm) |
| The consumption of the dry mixture when creating the adhesive layer | ~ 5 kg/m² |
You may be interested in…
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your applicationSelect site language:
