Properties:
- for interior and exterior use
- high adhesion
- moisture resistant
- frost resistant
- elastic
- convenient and easy to use.
- available in two colors: gray for non-sensitive to paint stones and white for natural stones
- for tile and stone with low water absorption, including ceramic tile
Packing: 25 kg
- Application
- Specifications
- Documents
- Reviews
- Features
The PRR-211 elastic contact solution was created with the aim of increasing the adhesion strength of the facing stone, paving elements and other high-density stone with the underlying layer, with light and medium traffic load.
For natural stone, which is sensitive to paint, use an elastic contact solution PRR-211 in white color.
The PRR-211 contact solution is effectively used when installing floor screeds, leveling level layers and when creating a contact layer with the PDD-070 drainage solution when paving stones.
The elastic contact solution PRR-211 is also included in the reproduction system for concrete and reinforced concrete structures, and is also used for corrosion protection of steel reinforcement and the formation of a contact layer on concrete surfaces when applying repair mixtures. The mixture of elastic contact solution PRR-211 for the device of the adhesive layer on dense mineral and steel surfaces has technical characteristics that meet or exceed the requirements of DSTU-P B V.2.7-126: 2011 of ZK4 group.
It is made in two versions: gray for stones, not sensitive to paint, and white for natural stone.
For tiles and stone with low water absorption, including ceramic tiles, and can also be used in underfloor heating.
Technical passport
There are no reviews yet.
| Сomposition | cement mixture with mineral fillers and polymeric modifiers |
| Appearance | homogeneous granular mixture gray color without impurities |
| Mixing ratio | ~ 4.5-5.0 L of water for 25 kg of dry mix |
| The shelf life of the mixture solution | at least 90 minutes |
| Open time | at least 20 minutes |
| Temperature of the substrate and bases | from +5 ° C to +30 ° C. |
| Thickness | ~ 1-2 mm |
| Adhesion to the substrate | not less than 1.0 MPa |
| Frost-resistance | not less than 75 cycles |
| Time of possible technological movement | after 48 hours |
| Consumption of dry mixture | ~ 1.5-2.0 kg / m² |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
-
0 800 300 590 +38 044 331 59 21
+38 044 599 24 28
or
Submit your applicationSelect site language:
