
tech description
PP-021 МАXI
Glue mix elastic thick-layer software PP-021 MAXI
Radiation Test Report | PP-021 MAXI
Properties:
- Fastening of all types of slabs and tiles on horizontal surfaces with large level differences (up to 30 mm) without prior leveling
- Fastening slabs to vertical bases
- Fastening of heavy large-format slabs (320x160 cm, 240x120 cm, 160x160 cm, 120x120 cm)
- For outdoor and indoor use
- For the arrangement of underfloor heating
- For balconies, terraces, stairs, operated roofs
- High adhesion, elasticity, strength
- Water and frost resistance
- Shrinkage resistant
- Rapid strength gain
- Increased plasticity
Packing: 25 kg
Application
- Application
- Specifications
- Features
- Reviews
Adhesive mixture PP-021 MAXI is used for fixing a thick-layer method of all types of tiles and tiles, including heavy large-sized plates made of porcelain stoneware and other artificial or natural stone (marble, sandstone, granite, etc.), On strong horizontal bases (concrete, cement-sand and anhydrite) screeds, including heated ones, surfaces lined with old ceramic tiles, internal cast asphalt, surfaces covered with a liquid film or sealants) with large level differences (up to 30 mm) outside and inside buildings without anticipation solid alignment.
There are no reviews yet.
Composition | mix of cement with mineral aggregates and polymer modifiers |
Appearance | homogeneous granular mixture of gray or white (indicated on the package) without impurities |
Filler size | no more than 0.63 mm |
Mixing ratio | 4.5-5.0 liters of water for 25 kg of dry mix |
Maximum adhesive layer thickness | 30 mm |
Optimum adhesive layer thickness | 5 mm |
Temperature of the substrate and a base | from +5 to +30 °С |
Expiration date from the moment of mixing | up to 120 minutes |
Open time | at least 30 minutes |
Adjustment time | at least 20 minutes |
Time possible technological movement | not earlier than 24 hours |
Adhesion to the base | not less than 1.8 MPa |
Compressive strength (after 28 days) | not less than 16 MPa |
Frost-resistance | at least 75 cycles |
Operating temperature of the solidified solution | from -30 to +90 °С |
Dry mix consumption | from 2.5 kg/m2 (on average 1.2-1.3 kg/m2 per 1 mm of adhesive layer) |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your applicationSelect site language:
