
Properties:
- fastening of heavy large-format plates on vertical surfaces
- fastening of a tile on difficult surfaces: painted, old tile, smooth concrete, OSB and others.
- facing of plinths, balconies, terraces, roofs, pools and tanks, heated floors
- high thixotropy, elasticity, strength
- water and frost resistance
- high adhesion
Packing: 25 kg
- Application
- Specifications
- Documents
- Reviews
- Features
The mixture is intended for facing of concrete, brick, cement-sand, cement-limestone, gypsum and other mineral and organic bases with slabs and tiles of different sizes, first of all large-format and heavy (from 90х90 cm and more), with various level of water absorption, including tiles of gres, slabs of artificial and natural stone.
It is recommended for facing of horizontal and vertical bases, including: facades, terraces, balconies, pools and tanks, heated floors. It is used for lining in places with heavy traffic and high mechanical loads. PP-020 BIG FORMAT is effective for facing on surfaces with laid tile, durable paint, fibrolite stoves and more.
Technical passport
CONCLUSION OF STATE SANITARY AND EPIDEMIOLOGICAL EXAMINATION ON DRY MIXTURES PC POLIPLAST LLC
CONCLUSION OF THE LABORATORY OF RADIOLOGICAL HYGIENE TM POLYPLAST | GLUE MIXTURES
There are no reviews yet.
Composition | mix of cement with mineral aggregates and polymer modifiers |
Appearance | homogeneous granular mass of gray or white (indicated on the package) without impurities |
Filler size | no more than 0,63 mm |
Mixing ratio | 6.0-6.5 l of water for 25 kg of dry mix |
Temperature of the substrate and a base | from +5 to +25 ° С |
Expiration date from the moment of mixing | up to 120 minutes |
Displacement of fixed material (only for walls) | no more than 0.5 mm |
Open time | at least 30 minutes |
Adjustment time | at least 30 minutes |
Time of possible technological movement | not earlier than 24 hours |
Adhesion to the base | not less than 2.0 MPa |
Compressive strength (after 28 days) | not less than 15 MPa |
Frost-resistance | at least 75 cycles |
Deflection | not less than 2.5 mm |
Operating temperature of the solidified solution | from -30 to +70 ° С |
Dry mix consumption | from 6 kg/m2 |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
-
0 800 300 590 +38 044 331 59 21
+38 044 599 24 28
or
Submit your applicationSelect site language:
