fbpx

PP-016 Blanco Ultra

Glue mix thin-layer for mosaic and marble (white)

Properties:

  • preserves and emphasizes the original color and luster of the mosaic surface and other translucent or translucent materials.
  • fastening mosaic of light and dark shades, transparent and translucent materials
  • elastic
  • heat-resistant
  • increased adhesion rates
  • fine-grained
  • highly plastic, easy to apply

Packing: 10 kg

Application
  • Application
  • Specifications
  • Documents
  • Reviews
  • Features

Adhesive mixture PP-016  Blanco Ultra is designed to fix mosaic tiles of light shades on a wide range of horizontal and vertical bases, resistant to deformation. The mixture PP-016  Blanco Ultra is used for fixing transparent and translucent materials when a white substrate is required, and is also recommended for dark colors of the mosaic, since it preserves the color and gloss of the coated surface better.

Adhesive PP-016  Blanco Ultra can be used to fix marble, granite and other natural stone of light and dark colors, ceramic and glass-ceramic tiles, GRES tiles, slabs and tiles from artificial stone and similar materials of light shades.

Mixture PP-016  Blanco Ultra is suitable for lining mineral surfaces of various density, such as concrete, cellular concrete, natural stone, brick, cement-sand screeds and plaster, gypsum coatings, gypsum board, OSB slabs.

Adhesive mixture PP-016  Blanco Ultra is used for facing walls and floors, inside and outside civil engineering buildings.

Mixture PP-016  Blanco Ultra is made on white cement determines its use under high-quality decorative cladding in the halls and in the squares of special events.

If necessary, to increase the hydrophobic properties, as well as adhesion to the base,  prepare the adhesive mixture with the addition of concentrated emulsions: contact PL-125 or elastic PL-127.

When adding the elastic PL-127 emulsion, the adhesive mixture PP-016  Blanco Ultra is effective for facing floors with water and electric heating, as well as existing tile coatings inside buildings without reflecting the old tile, that is, using the tile-to-tile method.

Adhesive PP-016  Blanco Ultra modified with an elastic additive PL-127 is suitable for base cladding together with a waterproofing layer that is subject to constant moisture, including: showers, plinths, terraces, balconies, roofs in use.

Technical passport

CONCLUSION OF STATE SANITARY AND EPIDEMIOLOGICAL EXAMINATION ON DRY MIXTURES PC POLIPLAST LLC

CONCLUSION OF THE LABORATORY OF RADIOLOGICAL HYGIENE TM POLYPLAST | GLUE MIXTURES

Leave your review

There are no reviews yet.

Compositiona mixture of cement with mineral aggregates and polymer modifiers
Appearancehomogeneous loose mixture of white color without impurities
Aggregate sizeno more than 0,63 mm
Mixing ratio2.0-2.2 liters of water per 10 kg of dry mix
Layer thicknessup to 6 mm
Air and substrate temperature during applicationfrom +5 to +30°С
Shelf life from the moment of mixing90 minutes
Mobilityfor fixing the mosaic – 5.5 ± 0.5 cm;
for fixing tiles – 4.5 ± 0.5 cm
Open timenot less than 20 minutes
Adjustment timenot less than 10 minutes
Time of possible technological movement (joint stitching)not earlier than 24 hours
Compressive strength (after 28 days)not less than 15 MPa
Base adhesion~1.5 MPa, but not less than 1.0 MPa
Frost resistancenot less than 50 cycles
Hardened mortar operating temperaturefrom -30 to +70°С
Dry mix consumption

In the middle: from 1.6-1.9 kg/m²
tile less than 5×5 cm – 1.8 kg/m²
tiles from 5×5 to 10×10 cm – 2.4 kg/m²
tiles from 10×10 to 20×20 cm – 3.6 kg/m²
tiles from 20×20 to 30×30 cm – 4.8 kg/m²
tile from 30×30 to 40×40 cm – 6.0 kg/m²
tiles from 40×40 to 60×60 cm – from 7.2 kg/m²

 

Where to buy

For technical advice and the purchase of our products, please contact us by phone or fill out the application form

or

Submit your application
Calculator Where To Buy