Adhesive mixture elastic
- fastenings of porcelain tile and tiles of large sizes with low water absorption (from 0%)
- for surfaces subject to periodic deformations
- facing plinths, terraces, heated floors
- facing surfaces without removing old tiles
- high adhesion ≥1.3 MPa
- resistant to vertical surfaces
- highly plastic
- increased moisture-resistance and frost-resistance
Packing: 25 kg
Adhesive mixture elastic PP-012 ELAST – ready-to-use dry adhesive mixture for fixing ceramic and ceramic granite (GRES) tiles of large sizes (45*45, 60*60 cm, etc.), tiles from natural and artificial stone, concrete, clinker tiles and other materials low water absorption from 0%, for strong horizontal and vertical bases, resistant to deformation (concrete, cement-sand, cement-lime, brick, plasterboard, bases of cellular concrete, etc.)
Also effective for base cladding, subject to periodic deformations (surfaces of floors with water and electric heating) and atmospheric influences (plinths, terraces and balconies with an angle of inclination of at least 2%, etc.).
Perhaps facing the surfaces without removing the old tile (“tile to tile”), with the exception of glazed.
It is applied both inside dry or damp rooms, and outside of buildings.
For fixing marble, tiles from other natural or artificial stone of light shades, it is necessary to use white PP mixes in accordance with the purpose (for example, adhesive mixture PP-012 ELAST white).
! Available in two colors: gray and white
There are no reviews yet.
|Composition||mix of cement with mineral aggregates and polymer modifiers|
|gray with a shade (white with a shade, if it is separately indicated on the package)|
|not more than 0.63 mm|
|4.5 – 5.0 l of water per 25 kg (0.19 + 0.01l of water per 1 kg) of the dry mix|
Air and substrate temperature during application
|from +5 to +30°С|
Expiration date from the beginning of mixing
|not less than 120 minutes|
|not less than 20 minutes|
|not less than 10 minutes|
The offset of the fixed material (only for walls)
|not more than 0.5 mm|
|no earlier than 24 hours|
Adhesion to the base in air-dry conditions (after 28 days)
|not less than 1.3 MPa|
|not less than 50 cycles|
Operating temperature of the hardened solution
|from -30 to +70°С|
Dry mix consumption
|from 2.0 kg/m²|