Properties:
- elastic (suitable for heated floors)
- high adhesion
- water repellent
- for indoor and outdoor works, swimming pools;
- perfectly smooth surface
- resistant to mechanical stress and pollution
- interferes with formation of a fungus
Packing: 2 kg; 5 kg
- Application
- Specifications
- Features
- Reviews
Fuga Flex is intended for grouting of seams of ceramic, glass facing, and also facing of artificial and natural stone (including marble), when working on horizontal and vertical surfaces up to 10mm.
Due to the high degree of hydrophobicity of the mixture for grinding (water drops roll off the surface) water does not penetrate into its structure. This property makes it possible to use the mixture for rubbing in places subject to intense periodic exposure to water (showers, bathrooms, kitchens, swimming pools inside buildings, etc.).
Waterproof seam can be used for interior and exterior work. Effective in deformations on deformed foundations: heated floors, particle boards and gypsum boards. The deformation joints in the lining and the places of contact of the plumbing equipment to the lining must be filled with sealant.
Video instruction for stirring elastic waterproof high-strength color seam
There are no reviews yet.
| Сomposition | mix cement with mineral fillers and polymer modifiers |
| Appearance | Loose homogeneous mixture without impurities |
| mixing ratio | semi-liquid: 0.34 l ± 0,01 liters of water per 1 kg of dry mixture Plastic: 0.3 l ± 0,01 liters of water per 1 kg of dry mixture Semi-dry: 0.25 l ± 0,01 liters of water per 1 kg of dry mixture |
| Shelf life from the beginning of mixing | at least 120 minutes |
| The temperature and the foundations of the substrate | from +5 ° C to +30 ° C |
| The water temperature for preparation of the mixture | from +15 ° C to +20 ° C |
| Compressive strength after 3 days | not less than 3.0 MPa |
| Compressive strength after 28 days | not less than 12 MPa |
| Flexural strength after 28 days | not less than 3.0 MPa |
| coefficient of water absorption | no more than 0.2 kg / m² ∙ √hod |
| Shrinking | 1.5 mm / m |
| Frost | at least 50 cycles |
| Operating temperature hardened mortar | -30 ° C to +70 ° C |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your applicationSelect site language:
