
Properties:
- high adhesion
- moisture resistant, frost resistant, vapor permeable
- non-combustible
- resistant to harmful atmospheric factors
- plastic, easy to use
- economical
Packing: 25 kg
Application
- Application
- Specifications
- Documents
- Reviews
- Features
Dry decorative plaster mix for finishing plastering work on smooth bearing hydrophilic bases, resistant to deformation (brick, lightweight concrete, concrete, cement-lime or cement plaster, adhesive reinforced layer in insulation systems, etc.), both inside and dry , and externally.
The finished surface of the plaster has a relief appearance – structure “Lamb”, “Coroid”, “Relief”.
Grain size from 1.5 mm to 5 mm.
Technical passport
CONCLUSION OF STATE SANITARY AND EPIDEMIOLOGICAL EXAMINATION ON DRY MIXTURES ТМ «DOPS»
CONCLUSION OF THE LABORATORY OF RADIOLOGICAL HYGIENE TM «DOPS»
FIRE TEST PROTOCOLS
There are no reviews yet.
Structure | cement mixture with mineral fillers and polymeric modifiers |
Pattern | woodworm, lamb, relief |
Fraction | 0-1.5 mm; 2 mm; 2.5 mm; 3 mm; 3.5 mm; 4 mm; 5 mm (grain size see. The front side of the package) |
mixing ratio | about 0.22 liters per 1 kg of dry mix |
Thickness | 1.5 – 5 mm, depending on the grain size |
Temperature of the substrate and bases | +5 to +30 ° C |
Shelf life after mixing | at least 60 minutes |
Adhesion to the substrate | not less than 0.5 MPa |
coefficient of water absorption | not more than 0.6 kg / m2 * √chas |
water vapor permeability | not less than 0.05 mg / (m x hour x Pa) |
crack resistance | absence of cracks in the layer thickness equal to the maximum recommended thickness deposition per pass |
Operating temperature of the solidified solution | -30 to +60 ° C. |
Consumption of dry mixture | 2.5 – 5.0 kg / m² vzavisimosti the texture and thickness of the layer |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
-
0 800 300 590 +38 044 331 59 21
+38 044 599 24 28
or
Submit your application