Ceramic tile adhesive


  • fixing ceramic tiles on horizontal and vertical surfaces
  • for interior and exterior use
  • creep resistant
  • does not require pre-soaking tiles
  • convenient to prepare and use
  • moisture-resistant, frost-resistant, vapor-permeating
  • economical

Packing: 25 kg

  • Application
  • Specifications
  • Features
  • Reviews

Glue mix for ceramic tile DOPS Ceramic – dry glue mix for fastening of a ceramic tile and other similar facing materials with a profiled mounting surface, water absorption not less than 3% and sizes not more than 400х400 mm on vertical or horizontal hygroscopic bases, not deformable bases – sandy, cement-lime, brick, etc.) inside dry or damp premises.
When performing exterior work, prepare the mortar using concentrated emulsions of contact PL-125 Poliplast TM, and use this solution if necessary to increase the hydrophobic properties or adhesion to the substrate. Observe the dosage indicated in the instructions for this product.

Leave your review

There are no reviews yet.

Сompositiona mixture of cement with mineral aggregates and polymer modifiers
Appearancehomogeneous bulk mixture without any impurities
Colorwith a touch of gray
The amount of water to prepare the mortar~ 0.16 l ± 0.01 l water per 1 kg of dry mixture
Size of fillernot more than 0.8 mm
Shelf life from the beginning of mixingup to 60 minutes
Open timeup to 20 minutes
Adjustment timeup to 10 minutes
Air temperature and substrates when appliedfrom +5 °С tо +30 °С
Adhesion to the basenot less than 0,5 MPa (not less than 1,0 MPa when adding emulsion PL-125)
Stitchingfor vertical surfaces – not earlier than 24 hours;

for horizontal surfaces – not earlier than 48 hours

Dry mix consumption
from 3 kg/m2 (average 1.8 – 2.0 kg/m2/mm)

Where to buy

For technical advice and the purchase of our products, please contact us by phone or fill out the application form


Submit your application

Select site language: