fbpx

DOPS BASIS

Floor screed reinforced

Properties:

  • layer thickness 10 to 100 mm
  • brand strength M200
  • microfiber reinforced
  • for underfloor heating systems
  • Moisture resistant, frost resistant
  • Crack resistant
  • For exterior and interior work

Packing: 25 kg

Application
  • Application
  • Specifications
  • Documents
  • Reviews
  • Features

DOPS BASIS – screed for adjusting floor elements. The mixture is used to arrange a traditional draft screed and pre-align floors for finishing, after installation or in the course of repair work both inside and outside buildings.

The structure of the material contains microfibers that minimize the formation of cracks and shrinkage.

The mixture is applied at a layer thickness of 10 to 100 mm.

 

 

 

Technical passport

CONCLUSION OF STATE SANITARY AND EPIDEMIOLOGICAL EXAMINATION ON DRY MIXTURES ТМ «DOPS»

CONCLUSION OF THE LABORATORY OF RADIOLOGICAL HYGIENE TM «DOPS»

Leave your review

There are no reviews yet.

Structurecement mixture with mineral fillers and polymeric modifiers
Appearancehomogeneous granular mixture without impurities
Colorgray with a touch of
Water demand in the bag 25 kg3.5 … 4.25 l
Shelf life mortar styling60 min
Term availability of the alignment layer after laying: the technological movement24 hours
Term availability of the alignment layer after laying: for laying ceramic tile and linoleum groundless3 days
For laying laminate flooring, parquet dyeing – after achieving the design strength and moisture, but not previously7 days
The compressive strength of the solution aged 3/28 daysnot less than 5/20 MPa
Shrinkage after 28 days– no more than 1.3 mm / m
frost-resistancenot less than 75 cycles
The substrate and air during the work#ERROR!
The layer thickness per passfrom 10 to 100 mm
Costs dry mixture-1,8-2,1 kg / m² at 1 mm layer thickness

Where to buy

For technical advice and the purchase of our products, please contact us by phone or fill out the application form

or

Submit your application
Calculator Where To Buy