Properties:
- reduces heat loss through wall structures
- prevents freezing of masonry joints
- frost-resistant, moisture-resistant
- highly plastic, easy to use
- contains perlite
Packing: 20 kg
Application
- Application
- Specifications
- Features
- Reviews
The heat-insulating masonry mixture DOPS Brick is intended for laying walls and partitions with energy-saving construction products and bricks (ceramic hollow blocks, slag blocks, expanded clay blocks, gas blocks, etc.; double, silicate, ordinary and other bricks). The mixture contains perlite, which reduces heat loss through the seams of wall structures. It is used both indoors and outdoors.
There are no reviews yet.
| Сomposition | Portland cement fractionated aggregates, perlite and modifying additives |
| Appearance | homogeneous granular mass of gray without any impurities |
| Size of filler | not more than 0.8 mm |
| Mixing proportions | 3.0 – 3.4 liters of water per 20 kg (0.15 – 0.17 l of water per 1 kg) of dry mixture |
| Air temperature and substrates when applied | from +5 tо +30*С |
| Operation temperature of solidified solution | from -30 tо +70 °С |
| Shelf life from start of kneading | at least 90 minutes |
| Layer thickness | 5-12 mm (8-10 mm recommended) |
| Frost resistance | at least 50 cycles |
| Thermal conductivity | not more than 0,35 W / (m * K) |
| Tensile strength at the age of 28 days | not less than 0.8 MPa |
| Strength grip with the base | not less than 0.5 MPa |
| Consumption of dry mixture | from 60 kg per 1 m³ at a layer thickness of 10 mm |
You may be interested in…
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your application