fbpx

Properties:

  • for machine and manual application
  • high vapor permeability
  • crack resistant
  • moisture resistant
  • for interior and exterior use
  • high adhesion
  • frost resistant

Packing: 25 kg

Application
  • Application
  • Specifications
  • Documents
  • Reviews
  • Features

Cement-lime facade plaster PСSh-016 is a dry mix intended for machine and manual high-quality plastering and leveling of walls and ceilings made of concrete, brick, aerated concrete, ceramic blocks, limestone.

PСSh-016 – is used for outdoor works when leveling and preparing facades for painting, decorative plastering, lining and thermal insulation of walls, as well as inside residential and non-residential buildings and in rooms with high humidity (saunas, bathrooms, garages, basements, etc.).

PСSh-016 is effective for starting stucco coatings with a thickness of 8 to 25 mm in one application.

 

Technical passport

CONCLUSION OF STATE SANITARY AND EPIDEMIOLOGICAL EXAMINATION ON DRY MIXTURES PC POLIPLAST LLC

CONCLUSION OF THE LABORATORY OF RADIOLOGICAL HYGIENE TM POLYPLAST | GLUE MIXTURES

Leave your review

There are no reviews yet.

Structurecement mixture with mineral fillers and polymeric modifiers
Appearancehomogeneous friable mass of gray
aggregate sizenot more than 1.25 mm
Temperature of the substrate and a base+5 to +30 ° C
mixing ratio0,16-0,17 l / kg of mixture (4-4,25 liter / sack)
Mobilityat least 6cm
Term solution suitabilityat least 60 minutes
Adhesion to the substrate after 28 daysnot less than 0.3 MPa
Compressive strength after 28 daysnot less than 7.0 MPa
Tensile strength in bending after 28 daysnot less than 2.0 MPa
water vapor permeabilitynot less than 0.05 mg / (mhchaskhPa)
frost-resistancenot less than 50 cycles
The maximum thickness of the layer25 mm

Where to buy

For technical advice and the purchase of our products, please contact us by phone or fill out the application form

or

Submit your application
Calculator Where To Buy