Properties:
- good adhesion
- moisture resistant
- frost resistant
- vapor permeable
- weather resistant
- incombustible
- highly flexible, easy to use
Packing: 25 kg
- Application
- Specifications
- Documents
- Reviews
- Features
Mineral structural plaster PСSh-056 “COROED” – ready dry decorative plaster mix for performing finishing plastering on equal load-bearing hydrophilic substrates that are resistant to deformation (brick, lightweight concrete, concrete, cement-lime or cement plaster, reinforced adhesive layer in insulation systems and other), both in the middle of dry and humid rooms, and outside buildings.
The finished surface of the plaster has a relief appearance – the structure “COROED”.
The base color is white, possible coloration (see on the front of the package) or further painting with specialized facade paints.
Grain size from 1.5mm to 3,5 mm (see the front of the package).
Technical passport
CONCLUSION OF STATE SANITARY AND EPIDEMIOLOGICAL EXAMINATION ON DRY MIXTURES PC POLIPLAST LLC
CONCLUSION OF THE LABORATORY OF RADIOLOGICAL HYGIENE TM POLYPLAST | GLUE MIXTURES
There are no reviews yet.
| Appearance | homogeneous granular mixture without impurities |
| Structure | coroed |
| Color | white with a touch or under the order |
| Moisture contents | no more than 0.5% |
| Fraction | 0-1.5 mm; 2 mm; 2.5 mm; 3 mm; 3.5 mm 4 mm; 4.5 mm not less than 97% (see grain size on the front side of the package) |
| Mixing ratio | 0,24 +/- 0,01 l/kg. 5,75-6,25l for 25 kg |
| Layer thickness | 2-5 mm depending on the grain size (8 mm in small recesses) |
| Surface adhesion | not less than 0.5 MPa |
| Mobility | 5,5 cm+0,5 mm |
| Mortar shelf life | not less than 60 minutes |
| Use temperature range | from +5°С to +30°С |
| Hardened mortar operating temperature | from -30°С to +60°С |
| Water holding capacity of the dry mix | not less than 75% |
| Water absorption coefficient | not less than 0.5 kg / m² × hour |
| Dry mix consumption | from 2.5-5.0 kg / m² depending on texture and layer thickness |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your applicationSelect site language:
