Mineral decorative structural plaster "RELIEF"


  • good adhesion
  • moisture resistant
  • frost resistant
  • vapor permeable
  • non-combustible
  • resistant to harmful atmospheric factors
  • easy to prepare and use

Packing: 25 kg

  • Application
  • Specifications
  • Features
  • Reviews

Mineral structural plaster PСSh-054 RELIEF  – ready dry decorative plaster mix for performing finishing plastering on equal load-bearing hydrophilic substrates that are resistant to deformation (brick, lightweight concrete, concrete, cement-lime or cement plaster, reinforced adhesive layer in insulation systems and other), both in the middle of dry and humid rooms, and outside buildings.

The finished surface of the plaster has a relief appearance – the structure “relief”.

The base color is white, possible coloration (see on the front of the package) or further painting with specialized facade paints.

Grain size from 1.5mm to 5mm (see the front of the package).


Leave your review

There are no reviews yet.

Appearance homogeneous granular mixture without impurities
Colorwhite with a touch or under the order
Moisture contentsno more than 0.5%
Fraction0-1.5 mm; 2 mm; 2.5 mm; 3 mm; 3.5 mm 4 mm; 4.5 mm not less than 97% (see grain size on the front side of the package)
Mixing ratio~0.19 L of water per 1 kg of dry mix
Layer thickness2-5 mm depending on the grain size (8 mm in small recesses)
Surface adhesionnot less than 0.5 MPa
Mortar shelf lifenot less than 60 minutes
Use temperature rangefrom +5°С to +30°С
Hardened mortar operating temperaturefrom -30°С to +60°С
Water holding capacity of the dry mixnot less than 75%
Water absorption coefficientnot less than 0.5 kg / m² × hour
Dry mix consumptionfrom 2.5-5.0 kg / m² depending on texture and layer thickness

Where to buy

For technical advice and the purchase of our products, please contact us by phone or fill out the application form


Submit your application

Select site language: