

Properties:
- For filling and grouting ventilated facades
- Elastic
- Resistant to aggressive atmospheric environment
- Moisture-resistant, frost-resistant, hydrophobic
- Non-corrosive to metal elements of the façade system
- Plastic, easy to prepare and use
- Easy to clean
- Durable
- Wide range of colors
Packing: Component A - 25 kg Component B - 3 liters.
- Application
- Specifications
- Features
- Reviews
PSM-083 is a two-component color mixture for jointing ventilated facades (imitation of brickwork and stone cladding), as well as for jointing when facing clinker, ceramic, silicate, and other facing bricks, natural and artificial stone. It is used to fill and join the seams of thermal panels (with a seam depth of 5 mm), to fill and provide an aesthetic appearance to the seams when constructing walls from a wooden bar, lining, boards, etc. It is applied on horizontal and vertical substrates, with a joint width of up to 20 mm between facing materials inside and outside the premises.
The mixture withstands deformation loads during the operation of ventilated facades (vibrations, mobility of the installation system, thermal expansion, etc.). The presence of polymer in the composition of the mixture determines high resistance to pollution, UV radiation, due to this it has high lightfastness and resistance to fading.
Produced in a wide range of colors.
There are no reviews yet.
Composition | Component A: a mixture of cement with mineral aggregates and modifying additives Component B: dispersion of polymers, modifying impurities |
Appearance | Component A: homogeneous dry bulk mass without impurities, appropriate color. Component B: homogeneous white opaque liquid. |
Color | according to the marking on the container |
Mixing ratio | 2.25-2.75 l Component B per 25 kg Component A (0.09 lg – 0.11 l of Component B per 1 kg of Component A) |
The size of the aggregate | fine-grained: up to 0.5 mm |
The density of the soluble mixture | ~ 1.5 kg / l |
Shelf life from the beginning of mixing | not less than 60 minutes |
Air and base temperature when applied | from +5 to + 30 ° C |
Stitching | not earlier than 45 minutes |
Adhesion to the base | not less than 1.5 MPa |
Compressive strength after 28 days | not less than 20 MPa |
Bending strength in 28 days | not less than 5 MPa |
The water absorption coefficient | not more than 0.5 kg / m² · √h |
Frost resistance | at least 75 cycles |
Operating temperature of the hardened solution | from -30 to + 70 ° C |
Consumption of dry mix | from 2.3 kg per 1 m2 of masonry depending on the type of masonry, width and depth of the seam |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your applicationSelect site language:
