PP-211 Horizont
Клейова суміш для облицювання горизонтальних поверхонь керамогранітом та каменем
Properties:
- For floor covering with large-format tiles
- For tiles up to 90x90 cm in size
- For "warm floor" systems
- High adhesion
- Has good plasticity, easy to work with
- High wetting ability of tiles
- Frost-resistant, water-resistant
- For interior and exterior work
Packing: 25 kg
- Application
- Specifications
- Features
- Reviews
PP-211Horizont adhesive mixture is a ready-made dry mixture for fixing ceramic, porcelain, clinker tiles, natural and artificial stone (except marble) with water absorption from 0%, dimensions not exceeding 90×90 cm (area up to 0.8 m2 with a longer side not exceeding 1.2 m) on horizontal mineral bases that do not deform (concrete, cement, cement-sand, etc.) inside and outside buildings. High plasticity and wetting ability of PP-211Horizont adhesive mixture ensures full contact of the mixture with the back side of the tile and the base, preventing the formation of cavities under the facing material. Optimal for facing floors with large-format slabs on large areas in commercial and industrial premises with increased pedestrian loads. Effective when arranging “heated” floors with both water and electric heating elements.
To attach marble and stones of light shades or those prone to staining, use white adhesive mixtures of the TM “POLIPLAST” brand according to their intended purpose.
There are no reviews yet.
| Composition | cement mixture with mineral fillers and polymer modifiers |
| Appearance and color | homogeneous loose mixture without extraneous impurities of gray color |
| Aggregate size | no more than 0.63 mm |
| The amount of water for preparing the mortar mixture | 5.25 – 5.75 l of water per 25 kg (0.22±0.01 l of water per 1 kg) of dry mixture |
| Air and substrate temperature during application | from +5 to +30 °C |
| The thickness of the adhesive layer | not more than 10 mm |
| Expiry date from the beginning of packaging | not less than 150 minutes |
| Open time | at least 30 minutes |
| Adjustment time | at least 10 minutes |
| The time of possible technological movement (opening of seams) | Not earlier than 24 hours |
| Прочность сцепления с основанием: Bonding strength with the base: – in air-dry conditions (after 28 days); | not less than 1.0 MPa |
| – after soaking in water, MPa; | not less than 0.5 MPa |
| – after alternating freezing and thawing, 50 cycles, MPa; | not less than 0.5 MPa |
| – after temperature exposure (+70 °C), MPa | not less than 0.5 MPa |
| Frost resistance | at least 50 cycles |
| Operating temperature of the hardened solution | from -30 to +70°C |
| Consumption of dry mixture | from 1.3 kg/m2/mm)
|
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your application