Properties:
- Fixing of XXL and any other plates slabs and tiles with water absorption from 0%
- For complex and critical foundations
- Compensates significant deformations of the bases
- High thermal and mechanical resistance operating loads
- High adhesion to all types of facings
- Plastic lightweight consistency, easy to use application
- 15% less consumption compared to others cement adhesives
- For internal and external works
- White color
Packing: 20 kg
- Application
- Specifications
- Features
- Reviews
Adhesive mixture PP-023 Ultra Flexible XXL – ready-made dry adhesive mixture of white color, reinforced with microfibers, for fastening thin plates of XL and XXL format, agglomerate and any other plates with water absorption from 0%: ceramic, glass-ceramic, ceramic granite tiles and mosaics, natural and artificial stone, marble, cast concrete slabs, etc.
It is applied on any basis, namely:
traditional foundations – concrete, cement-sand, cement-lime, gypsum plasters with a thickness of at least 10 mm, cement, anhydrite screeds, bricks, plasterboard, etc.;
complex and critical foundations: “fresh screeds” aged up to 5 days after installation; old tiled coverings, including glazed tiles; floors and walls with all types of heating; “floating” floors; stable wooden floors; surfaces of furnaces and fireplaces (except furnaces); OSB, chipboard, etc.
Do not use the adhesive mixture on metal, rubber, PVC coatings and linoleum, etc.
Adhesive mixture PP-023 provides high adhesion and elasticity of the adhesive layer under the tile, thereby relieving stress and acting as a compensation layer, providing resistance to high deformation loads (mobility, vibration). Due to the low viscosity, the mixture is applied more easily and quickly, and consumption is 15% less compared to other cement adhesives. It is used outside and inside dry or wet rooms (bathrooms, swimming pools, saunas, etc.). Recommended for cladding balconies, terraces, facades, as well as in places with heavy traffic and high mechanical loads.
There are no reviews yet.
| Storage | a mixture of cement with light aggregates and highly elastic polymer modifiers |
| Appearance | homogeneous white mass without foreign impurities |
| Coarseness of aggregate | no more than 0.5 mm |
| Mixing proportions | 6.6-7.4 liters of water per 20 kg of dry mixture (0.35±0.02 l of water per 1 kg of dry mixture) |
| Offset of the material to be fixed (for walls only) | no more than 0.5 mm |
| Expiry date from the beginning of mixing | at least 5 hours |
| Open time | at least 30 minutes |
| Adjustment time | at least 40 minutes |
| Air temperature and base during application | from +5 °С to +25 °С |
| Adhesion strength to the base in air-dry conditions (after 28 days) | not less than 1.3 MPa |
| Adhesion strength to the base after soaking in water, MPa | not less than 1.0 MPa |
| Adhesion strength to the base after alternating freezing and thawing, 50 cycles, MPa; | not less than 1.0 MPa |
| Adhesion strength to the base after temperature exposure (+70 °С), MPa | not less than 1.0 MPa |
| deflection | not less than 5.0 mm |
| Layer thickness | Up to 10 mm |
| Operating temperature of the hardened solution | from -50 °C to +80 °C |
| Time of possible technological movement (stitching of seams) | for ceramics on walls – no earlier than 16 hours; on the floor – no earlier than 24 hours |
| Consumption of dry mixture | from 1.0 kg/m2/1 mm layer thickness |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your application