Properties:
- for outdoor work
- water resistant, frost resistant, crack resistant
- minimal capillary suction of moisture
- available in three colors
- resistant to aggressive environmental influences
- resistant to efflorescence and fading
- resistant to grass overgrowing
Packing: 25 kg
- Application
- Specifications
- Features
- Reviews
Elastic waterproof seam filler PDR-073 is designed for filling seams 5 to 30 mm wide in coatings made of ceramic lining, clinker pavers (pavement bricks), polygonal stones, or curved concrete elements (FEM) made of concrete and natural stones: sandstone, granite, gabbro, quartzite, labradorite, basalt, porphyry and others.
Elastic joint filler PDR-073 is intended for joint application with drainage underlying layer PDR-070 and the waterproofing layer PRG-01 (PRG-02), as well as the tray elements for drainage of water in the arrangement of terraces, pavilions, paths and grounds of the country houses, roads and grounds of parks and urban areas, entrances and parking cars lots and more.
Solution filler seams PDR-073 resistant to the formation of efflorescence and damage associated with
exposed to low temperatures, as well as resistant to the formation of cracks in wide seams and intended
for use on light and medium load surfaces.
! Available in three colors: gray, black, beige.
There are no reviews yet.
| Structure | a mixture of sulfate-resistant cement, polymeric modifiers and mineral fillers |
| Color | gray, black, beige |
| Mixing ratio | ~ 0.12 l of water per 1 kg of dry mixture; ~ 3.0 l of water per 25 kg of the dry mixture |
| The term mortar suitability | at least 120 minutes |
| Thickness | in pedestrian areas – not less than 25 mm; under a load of transport – at least 40 mm |
| The width of the seams | 5-30 mm |
| Compressive strength (after 7 days) | not less than 10 MPa |
| Compressive strength (after 28 days) | not less than 30 MPa |
| Adhesion of the surface | not less than 0.2 MPa |
| Frost-resistance | not less than 50 cycles |
| Operating temperature of the solidified solution | from -50 ºC to +100 ° C |
| Time of possible technological movement | after 24 hours |
| Pointing | after complete curing of the bedding layer, not earlier than 48 hours at 23 ° C and 50% humidity |
| The ability to perceive the load | – washing the surface after grouting – 2 hours; – passage of people – not earlier than 24 hours; – washing the surface pressure – 28 days; – traffic – not earlier than 7 days |
| Product output | ~16 dm³ sutures from the bag (25 kg) |
| Consumption of dry mixture | ~ 1.55 kg / dm volume seams |
You may be interested in…
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your application