Properties:
- resistant to mechanical damage and abrasion;
- high chemical resistance and weather resistance;
- has excellent adhesion to the base;
- vapor permeable, waterproof;
- odorless, contains no solvents
- easy to apply;
- for internal and external works;
- has a wide range of colors
Packing: 2; 4; 9; 18 kg
- Application
- Specifications
- Features
- Reviews
Two-component epoxy paint EpoxyProFloor is designed to create a protective, waterproofing, anti-corrosion and decorative wear-resistant finish of concrete, cement-sand screeds, toppings, self-leveling coatings, asphalt, brick, glass, ceramics, metal elements and other bases.
It is used for arranging the finishing coating in all branches of industrial and civil activity:
– floors of production shops, warehouses, logistics and trade premises;
– floors of garages, parking lots, car washes;
– for the marking of street areas, pedestrian and bicycle paths, highways;
– renewal of coatings made of ceramic tiles, mosaics, etc.
Due to its technical characteristics, EpoxyProFloor paint extends the service life of concrete and cement surfaces and protects against intense mechanical loads (pedestrian traffic and traffic of vehicles on tires), premature wear, dust formation, exposure to chemicals, moisture and atmospheric phenomena. It is used to renew old epoxy coatings. Does not contain solvents and strong smell. Forms a smooth and even surface, or if necessary – a rough one, which eliminates slipping. Designed for exterior and interior work on horizontal and vertical surfaces.
Importantly! The coating acquires full stability no earlier than after 8 days.
There are no reviews yet.
| Storage | Component A: Two-component composition based on water-emulsion epoxies. Component B: hardener |
| Color and degree of gloss | White, (matte, glossy) |
| Tinting | 15 basic colors |
| Density | ~ 1.2 kg/l (component A+B) |
| The pH indicator | 9,0-10,0 |
| Vapor permeability | V1 High ˃ 150 |
| Water permeability | W3 Low ≤ 0.1 kg/(m2 x h 0.5) |
| Limit value for VOC content | ˂150 g/l VOC |
| Time of life | up to 60 min |
| Temperature of base and air during application | from +15 to +30°С |
| Mixing ratio | 5:1 mass parts |
| Cost | 0.2 – 0.45 kg/m2 depending on the type of surface |
| Drying time, at an air temperature of +20 ° C and a humidity of 55% | For applying subsequent layers – 12 hours Technical movement – 24 hours Full operation – 8 days |
| Diluent | Water* |
You may be interested in…
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your application