Properties:
- Increases the service life and wear resistance of concrete floors and other surfaces
- Protects the surface from any destructive influences and environmental factors
- Forms a film resistant to chemical influences (acids, alkalis, gasoline, lubricants)
- Highly resistant to mechanical damage and abrasion;
- Has excellent adhesion to the base;
- Vapor permeable, waterproof;
- Odorless, contains no solvents
- Transparent, easy to apply;
- For internal and external works
Packing: 2 kg; 4 kg; 8 kg
- Application
- Specifications
- Features
- Reviews
The two-component epoxy varnish EpoxyProFinish is designed to create a protective, waterproofing and decorative wear-resistant finish of concrete, cement-sand screeds, toppings, self-leveling coatings, metal, wooden and other mineral surfaces as part of the EpoxyPro complex epoxy system (EpoxyProFloor paint and EpoxyProGrunt primer).
It is used for arranging the finishing layer in all branches of industrial and civil activity:
– floors and walls of production shops, warehouses, logistics and trade premises;
– floors and walls of garages, parking lots, car washes;
– metal constructions, equipment, tanks, etc.
Due to its technical characteristics, EpoxyProFinish varnish extends the service life of surfaces, protects the coating from mechanical damage (scratches, impacts, etc.), intense loads (pedestrian traffic and traffic of vehicles on tires), premature wear, dust accumulation, exposure to chemicals, moisture and atmospheric phenomena , resistant to UV radiation.
It can be used to renew old epoxy coatings.
Does not contain solvents and strong smell.
Forms a smooth and even surface with a matte or glossy degree of gloss, transparent after drying.
Designed for exterior and interior work on horizontal and vertical surfaces.
Importantly! The coating acquires full stability no earlier than after 8 days.
There are no reviews yet.
| Composition | Component A: Two-component composition based on water-emulsion epoxy resins and modifying additives Component B: hardener |
| Color and degree of gloss | Transparent matte/glossy |
| Density | ~ 1.0 kg/l (component A+B) |
| The pH indicator | 9.0-10.0 |
| Vapor permeability | V1 High ˃ 150 |
| Water permeability | W3 Low ≤ 0.1 kg/(m2 x h 0.5) |
| Limit value for VOC content | ˂75 g/l VOC |
| Time of life | up to 45 min |
| Temperature of base and air during application | from +15 to +30°С |
| Mixing ratio | 3.3:1 mass parts |
| Cost | 0.3 – 0.4 kg/m2 depending on the type of surface |
| Drying time, at an air temperature of +20 ° C and a humidity of 55% | For applying subsequent layers – 12-24 hours Mechanical loads – after 7-9 days |
| Diluent | Water* |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your application