Properties:
- Fixing of gres and ceramic tiles
- For tiles up to 60x60 cm
- For vertical and horizontal surfaces
- Resistant to displacement
- Waterproof, frost-resistant
- For "Heated floor" systems
- Inside and outside buildings
Packing: 25 kg
- Application
- Specifications
- Features
- Reviews
DOPS GRES adhesive mixture is intended for facing vertical and horizontal bases with porcelain and ceramic tiles, natural and artificial stone slabs with water absorption of not less than 0.5% and dimensions of not more than 600×600 mm on horizontal bases and 450×450 mm on vertical bases that do not deform (concrete, cement-sand, cement-lime, brick, etc.) both inside dry or wet rooms and outside buildings.
Can be used for laying tiles in “warm floor” systems with water heating.
When facing surfaces with increased operational requirements (high loads, floor heating with an electric heating element, constant weathering, etc.), as well as for gluing tiles with water absorption less than 0.5%, prepare the adhesive mixture with the addition of contact emulsion PL-125 TM “Poliplast”. Follow the dosage indicated on the label of this product.
For fastening marble, especially light shades, it is recommended to use other white adhesive mixtures.
There are no reviews yet.
| Composition | mixture of cement with mineral aggregates and polymer modifiers |
| Appearance | homogeneous loose mixture of gray color without foreign impurities |
| Mixing proportions | 4.5-5.0 l of water per 25 kg (0.18-0.20 l of water per 1 kg) of dry mixture |
| Aggregate size | no more than 0.63 mm |
| Storage period from the beginning of mixing | no less than 90 min |
| Open time | no less than 20 min |
| Adjustment time | no less than 10 min |
| Air and base temperature during application | from +5 °C to +30 °C |
| Displacement of the material being fixed (for walls only) | no more than 0.5 mm |
| Adhesion strength to the base in air-dry conditions (after 28 days) | no less than 1.0 MPa |
| Adhesion strength to base after soaking in water, MPa; | not less than 0.5 MPa |
| Adhesion strength to the base after alternating freezing and thawing, 50 cycles, MPa; | not less than 0.5 MPa |
| Adhesion strength to the base after temperature exposure (+70 °C), MPa | not less than 0.5 MPa |
| Compressive strength (after 28 days) | not less than 10.0 MPa |
| Joint filling | for ceramics – not earlier than 24 hours; for porcelain stoneware – not earlier than 48 hours |
| Maximum thickness of the adhesive layer under the tile | not more than 10 mm |
| Operating temperature of the hardened solution | from -30 to +70С |
| Dry mix consumption | from 1.3 kg/m2/mm of layer thickness |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your application