Properties:
- for arranging a protective reinforced layer on polystyrene foam and mineral wool plates
- for fastening polystyrene foam and mineral wool thermal insulation boards
- has a high level of fixation
- reinforced with fiber
- impact resistant
- for low-rise construction
- frost-resistant, moisture-resistant, vapor-permeable
- plastic, easy to use
- for external and internal works
Packing: 25 kg
Application
- Application
- Specifications
- Features
- Reviews
The DOPS Fasad UNI adhesive mixture is intended for fastening expanded polystyrene (EPS, XPS) and mineral wool plates with the subsequent installation of a protective reinforced layer when insulating the facades of low-rise buildings.It is used on non-deformable mineral bases (concrete, cement, cement-lime, brick, etc.). Recommended for cottage construction.
There are no reviews yet.
| Composition | a mixture of cement with mineral aggregates and polymer modifiers |
| Appearance | homogeneous loose mixture of gray color without extraneous impurities |
| Mixing ratio | for gluing: 4.5 – 5.0 l of water per 25 kg (0.19±0.01 l of water per 1 kg) of dry mixture. for reinforcement: 5.5 – 6.00 l of water per 25 kg (0.23±0.01 l of water per 1 kg) of dry mixture |
| Coarseness of aggregate | no more than 0.50 mm |
| Expiry date from the beginning of mixing | at least 120 min |
| Adjustment time: | at least 10 min |
| Air temperature and base during application | from +5 °С to +30 °С |
| Operating temperature of the hardened solution | from -30 °C to + 70 °C |
| Adhesion strength to the base | not less than 0.8 MPa |
| Adhesion strength to insulation plates | cohesive gap along the insulation plates after 7 days |
| Frost resistance | at least 50 cycles |
| Vapor permeability, mg/m·h·Pa | 0.10 per minwatt; 0.04 for polystyrene foam |
| Water absorption coefficient | no more than 0.6 kg/m2h |
| Carrying out further finishing works | not earlier than in 2 days |
| The thickness of the adhesive layer | up to 10 mm |
| Consumption of dry mixture | for fastening insulation – from 5 kg/m2, arrangement of the reinforcing layer – from 3.5 – 4 kg/m2 |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your application