Properties:
- resistant to weathering
- resistant to mechanical damage
- high strength and durability
- Maximum vapor permeability
- Hydrophobic
Packing: 25 kg
- Application
- Specifications
- Features
- Reviews
Ready-to-use silicate decorative plaster for protection and decoration
surfaces with high operating load outside and inside the premises.
Can be used as a finishing layer in a thermal insulation system using
mineral wool plates. Suitable for mineral bases (concrete, brick, cement-sand
and gypsum plasters, putties, slabs, etc.). Objects of application: facades of buildings and
buildings, except for horizontal surfaces that are under the constant influence of water.
Inside the premises: staircases, corridors, halls, public facilities, etc
require high wear resistance of walls, walls of vestibules and halls. Finished coating
it is possible to paint with silicate water-dispersion paints.
There are no reviews yet.
| Storage | A mixture of modified aqueous dispersions of polymers, silicates, fillers, functional and hydrophobic additives |
| Color | White |
| Tinting | Base A and Base C. Toned with water and universal pigment pastes. |
| Density | ~ 1.7 kg/l |
| Mass fraction of non-volatile substances | 80 % |
| Dry film thickness | E5 ˃400 μm |
| Vapor permeability | V1 High ˃ 150 |
| Water permeability | W2 Medium (≤ 0.5 > 0.1 kg/(m2 x h 0.5) |
| Base temperature during application | from + 5 to +30 ° C |
| Coverage rate | 2.0-4.0 m²/l depending on the fraction |
| Drying time, at an air temperature of +20 ° C and humidity of 55% | 4-8 hours |
| Diluent | Water |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your application