Properties:
- For modeling textures of various materials using special matrices, rollers, stencils and other tools
- Contains reinforcing fibers that prevent the formation of microcracks
- Covers surface defects and irregularities
- High strength, with increased resistance to mechanical damage
- Resistant to atmospheric influences, ultraviolet
- Resistant to the formation of fungi and mold
- Vapor permeable, waterproof
- Increased elasticity, easy to apply
- Manual and mechanized application
Packing: 20 l/25 kg
- Application
- Specifications
- Features
- Reviews
The ready-to-use relief decorative plaster on a silicone base is intended for decoration and protection of facades, as well as use as a finishing layer in the thermal insulation system of facades made of polystyrene foam and mineral wool plates, incl. in regions with frequent and intense precipitation. Allows you to get various textures (imitation of wild rock stone, weathered wooden board, concrete, clinker tiles, etc.) with the help of stencils, prints, patterns, structural rollers and other tools for creative wall decoration. Suitable for mineral bases (concrete, brick, cement and cement-sand plasters) and gypsum plasters, putties, GKL, chipboard, etc. It can be used for decorative decoration of walls in rooms with normal and high humidity.
Applications:
– facades of high-rise and private buildings and structures, except for horizontal surfaces that are under the constant influence of water;
– staircases, corridors, halls, walls of vestibules and halls;
– public institutions that require high wear resistance of walls.
It is possible to tint the plaster or paint the finished coating with silicone water-dispersion paints or azure TM GreenLine to create realistic effects.
There are no reviews yet.
| Compound | A mixture of modified silicone resins and acrylic copolymers with mineral fillers, modifying additives, and an antibacterial complex. |
| Color | White |
| Toning | Tinted with water-based and universal pigment pastes. |
| Density | ~ 1.75-1.85 kg/dm³ |
| pH value | 8,5-9,5 |
| Mass fraction of non-volatile substances | 82-85 % |
| Vapor permeability | V1 High ˃ 150 |
| Water permeability | W3 Low ≤ 0.1 kg/(m2 x h 0.5) |
| Limit value for VOC content | 10g/l VOC |
| Substrate and air temperature during application | from +10 to +30°С |
| Drying time, at air temperature +20°C and humidity 55% | 24 hours |
| Diluent | Water |
| Mixture consumption | Approximately 2.9-4.2 kg/m2 |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your application