Properties:
- Resistant to atmospheric influences
- Resistant to mechanical damage
- Crack resistant
- Vapor permeable
Packing: 25 kg
- Application
- Specifications
- Features
- Reviews
For the protection and decoration of surfaces with a high operational load outside and inside the premises, as well as when used as a finishing layer in the thermal insulation system using polystyrene foam plates. Designed for application on cement-sand, cement-lime, lime, gypsum, concrete, brick surfaces, GK sheets, chipboard, OSB, etc. Recommended for decorative decoration of facades of buildings and structures, staircases, corridors, halls, lobbies of public institutions that require high wear resistance of walls. Gives the surface the appearance of a decorative structural coating with a “stone” texture or a furrowed texture of the “bark” type. The type of coating is indicated separately on the front side of the package.
Do not use on horizontal surfaces that are constantly exposed to water.
There are no reviews yet.
Storage | A mixture of modified aqueous dispersions of polymers, fillers, and functional additives |
Color | White |
Tinting | Toned with water and universal pigment pastes |
Density | ~ 1.7 kg/l |
Mass fraction of non-volatile substances | 80 % |
Dry film thickness | E5 ˃400 μm |
Vapor permeability | V2 Medium (≤150 >15) |
Water permeability | W2 Medium (≤ 0.5 > 0.1 kg/(m2 x h 0.5) |
Base temperature during application | from + 5 to +30 °C |
Coverage rate | 2.0-4.0 kg/m2 depending on the fraction |
Drying time, at an air temperature of +20 °C and humidity of 55% | 8 hours |
Diluent | Water |
Where to buy
For technical advice and the purchase of our products, please contact us by phone or fill out the application form
- 0 800 300 590 +38 044 330 04 28
or
Submit your application